Applications

Compression Fittings can be used with Copper, Brass, Aluminum or Plastic tubing. These fittings are primarily used in water, gasoline, oil and vacuum lines.

Advantages

Compression Fittings do not require flaring, soldering or other preparation to assemble. We use CA 360, CA 345 or CA 377 Brass for manufacturing.

Temperature Range

-65°F to 250°F at maximum operating pressures.

Vibration

Short nuts are to be used when vibration is minimal. The long nuts are available for higher vibration applications.

How to Assemble

  • Cut a smooth, square end on the tubing
  • Slide nut and then the sleeve onto tube – threads facing the end
  • Insert the tube into fitting
  • Thread the nut to the body until its tight, and then
    upto 1/4″   1 1/4 turns
    5/16″   1 3/4 turns
    3/8″ & up   2 1/4 turns
Sleeve

Sleeve
60 Series
Available in Sizes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8

Nut

Nut
61 Series
Available in Sizes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8

Cap

Cap
61C Series
Available in Sizes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8

Long Nut

Long Nut
61L Series
Available in Sizes 1/8, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4

Double Union

Double Union
62 Series
Available in Sizes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8

Reducing Double Union

Reducing Double Union
62 Series
Available in Sizes 1/4×1/8, 1/4×3/16, 5/16×1/4, 3/8×1/4, 3/8×5/16, 1/2×3/8, 5/8×3/8, 5/8×1/2

Bulkhead Union

Bulkhead Union
62BU Series
Available in Sizes 1/4, 3/8, 1/2

Union Tee

Union Tee
64 Series
Available in Sizes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8

Union Elbow

Union Elbow
65 Series
Available in Sizes 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8

Female Connector

Female Connector
66 Series
Available in Various Sizes

Male Connector

Male Connector
68 Series
Available in Various Sizes

Male Elbow

Male Elbow
69 Series
Available in Various Sizes

Translate »
error: Content is protected !!